Explorer 2WD V8-302 5.0L VIN P SFI (1999)
11. Remove the bolts.
12. Remove the bolts and the nuts.
13. Remove the oil pan and the gasket.
Installation
On All Vehicles
1. Clean and inspect the sealing surfaces.
2. Apply a bead of silicone rubber in six places. Use Silicone Gasket and Sealant F7AZ-1 9554-EA or equivalent meeting Ford specification
WSE-M4G323-A4.
NOTE: Use a straightedge to maintain the rear oil pan edge-to-rear cylinder block edge alignment.