ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Campaign - Supplemental Tire Inflation Label|Page 2248 > < Campaign - Supplemental Tire Inflation Label|Page 2246
Page 4
background image

LABOR ALLOWANCES

PARTS REQUIREMENTS

Ordering Instructions for Additional Labels

The supplemental tire inflation labels for this program are being sent directly to customers of the affected vehicles. Additional labels may be ordered by
calling the Recall Hotline at 1-800-325-5621. Inform the operator you are calling in regard to Special Field Action 00L09. Be prepared to provide your
name, address, dealer P & A code, and vehicle(s) you need label(s) for.

NOTE:

There are two different labels. Affected Explorer/Mountaineer and Explorer 2-Door Sport 1991 through 2001 model year label will have
recommended pressure of 30 psi front and 30 psi rear. Affected Explorer Sport Trac 2001 model year label will have 30 psi front and 35 psi rear.

DEALER PRICE

Dealers will not be charged for the supplemental safety certification labels ordered under this program.

Attachment III - Technical Information

AFFECTED VEHICLES: 
CERTAIN 1991-2001 EXPLORER, 1997-2001 MOUNTAINEER AND 2001
EXPLORER SPORT TRAC AND EXPLORER 2-DOOR VEHICLES.

SERVICE PROCEDURE

1.

Open the driver's door and clean the area of the door below the certification label using isopropyl alcohol and a clean rag. Remove any
non-permanent labels such as oil change labels, if necessary. If any other permanent label is in this location, clean an area large enough to allow
for full adhesion of the label to the painted door surface as close to the certification label as possible.

2.

Allow the area to dry.

3.

Peel the backing off the new supplemental certification label and install it per the illustration.

Campaign - Supplemental Tire Inflation Label|Page 2248 > < Campaign - Supplemental Tire Inflation Label|Page 2246