Explorer 2WD V8-302 5.0L VIN P SFI (1999)
adjusters (if so equipped) child safety seat tether attachments and attaching hardware should be inspected after any collision. All belt assemblies
should be replaced unless a qualified technician finds the assemblies show no damage and operate properly. Belt assemblies not in use during a
collision should also be inspected and replaced if either damage or improper operation is noted.
1. Remove the rear seats.
2. Remove the rear seat belt buckle assembly.
1
Remove the nuts.
2
Remove the rear seat belt buckle assembly.
INSTALLATION
1. To install, reverse the removal procedure.
-
Check the restraint system for proper operation.
Two-Door
REMOVAL
WARNING: All seat belt assemblies including retractors, buckles, front seat belt buckle support assemblies (slide bar), shoulder belt height
adjusters (if so equipped) child safety seat tether attachments and attaching hardware should be inspected after any collision. All belt
assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate properly. Belt assemblies not in
use during a collision should also be inspected and replaced if either damage or improper operation is noted.
1. Remove the rear seats.
2. Remove the rear seat belt buckles.
1
Remove the nuts.
