Explorer 2WD V8-302 5.0L VIN P SFI (1999)
Cruise Control Switch: Service and Repair
With Remote Audio/Climate Controls
REMOVAL
1. Disconnect the battery ground cable.
2. Separate the speed control actuator switch out of the steering wheel.
CAUTION: When separating the speed control actuator switch from the steering wheel, it is necessary to take precautions not to damage the
steering wheel.
3. Remove the speed control actuator switch.
1
Disconnect the speed control actuator switch electrical connector.
2
Remove the speed control actuator switch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn its strategy.
