Explorer 2WD V8-302 5.0L VIN P SFI (1999)
Shift Cable: Adjustments
1. Place the gearshift lever in the (D) position and hang a 3.6 kg (8 lb) weight on the gearshift lever.
2. Raise and support the vehicle.
3. Disconnect the transmission shift cable from the manual control lever.
4. Pull out the transmission shift cable adjustment lock tab on the shift cable body.
5. Place the manual control lever in the (D) position.
1
Place the manual control lever in the first gear position. Rotate the manual control lever forward until travel stops.
2
Move the manual control lever back two detents to the position.
6. Connect the transmission shift cable to the manual control lever.
