Explorer 2WD V8-4.6L (2008)
Disassembly and Assembly
1. Remove the second row 40 percent seat of the 60/40 bench seat.
2. Remove the second row, 40 percent bench seat backrest.
3. CAUTION: Use care when separating the seat upholstery from the hook-and-loop strip, or the hook-and-loop strip can be torn from the
seat cushion foam pad.
Release the J-clips, separate the hook-and-loop fasteners and remove the seat cushion trim cover.
4. Remove the cushion foam pad.
5. Remove the cushion pad supports.
6. To assemble, reverse the disassembly procedure.
