Explorer 2WD V8-4.6L (2008)
60 Percent, Bench
SEAT CUSHION - SECOND ROW, 60 PERCENT, BENCH
Disassembly and Assembly
1. Remove the second row 60 percent seat of the 60/40 bench seat.
2. Remove the second row 60 percent bench seat backrest.
-
To install, tighten to 40 Nm (30 lb-ft).
4. CAUTION: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from
the cushion foam pad.
Release the J-clips, separate the hook-and-loop fasteners, remove the hog rings and the cushion trim cover.
