Explorer 2WD V8-4.6L (2008)
4. Install the special tool and press it into the spring lock coupling.
5. Separate the spring lock coupling.
Connect - Type I
1. Inspect and clean both spring lock coupling ends.
2. NOTE:
-
Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
-
Lubricate the spring lock coupling with clean engine oil.
Align the fuel tube spring lock coupling and push together until a click is heard.
3. Pull on the spring lock coupling to make sure it is fully seated. Install the fuel tube safety clip on the male end.
Disconnect - Type II
