Explorer 2WD V8-4.6L (2008)
7. Partially fill the transmission.
Transmission Filter - In Line
Transmission Filter - In Line
NOTE: Use the following guidelines for installing the transmission fluid in-line filter:
^
If the transmission was overhauled and the vehicle was equipped with an in-line transmission fluid filter, install a new in-line transmission fluid
filter.
^
If the transmission was overhauled and the vehicle was not equipped with an in-line transmission fluid filter, install a new in-line transmission fluid
filter kit.
^
If the transmission is being installed for a non-internal repair, do not install an in-line transmission fluid filter or in-line transmission fluid filter kit.
^
If installing a Ford-authorized remanufactured transmission, install a new in-line transmission fluid filter.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the secondary latch from the transmission fluid cooler connector.