ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Bumper Reinforcement > < Body - Poor Wheel Lip Molding To Bumper Fascia Fit|Page 10052

Explorer 2WD V8-4.6L VIN 8 (2006)

Page 3
background image

9. Release the bumper cover-to-fender clips.

Mountaineer

10. Remove the bumper cover upper screws.
11. Rotate the bottom of the front bumper cover upward.
12. Apply downward pressure to the top of the front bumper cover to release the 3 locking tabs.

All vehicles

13. Remove the front bumper cover.
14. To install, reverse the removal procedure.

Front Bumper Reinforcement > < Body - Poor Wheel Lip Molding To Bumper Fascia Fit|Page 10052