Explorer 2WD V8-4.6L VIN 8 (2006)
-
Disconnect the liftgate trim panel electrical connector.
4. To install, reverse the removal procedure.
Rear Quarter Trim Panel
REAR QUARTER TRIM PANEL
Removal and Installation
1. Remove the rear door scuff plate.
2. Remove the C-pillar trim panel.
3. Remove the D-pillar trim panel.
4. Remove the liftgate scuff plate trim panel.
5. Remove the luggage compartment assembly cover, if equipped.
6. Remove the stowage compartment doors.
7. Position the carpet aside.
8. Remove the rear quarter trim panel.
9. Disconnect the electrical connectors, if necessary.
10. To install, reverse the removal procedure.