Explorer 2WD V8-4.6L VIN 8 (2006)
Second Row, 60 Percent, E-Z Entry Cushion (Part 2)
Disassembly
1. Remove the second row, 60 percent E-Z entry seat from the vehicle.
2. Lower the backrest and position the seat to the E-Z entry position.
-
The latch feet should be released from the mounting plate and the cushion and backrest must be pivoted up.
3. Using the kneeling mechanism release handle on the backrest, pull the handle and position the kneeling mechanism down in the fold flat load floor
position.
-
The cushion and backrest of the seat will be in the E-Z entry position and the kneeling mechanism will be in the fold flat load floor position.
