Explorer 2WD V8-4.6L VIN 8 (2006)
5. For vehicles with a 2-piece brake disc and hub assembly:
1
Remove the brake disc from the hub.
2
Remove metal shavings from the hub, the brake disc mounting surfaces and the anti-lock brake system (ABS) sensors.
3
Apply anti-seize lubricant to the hub mounting surface to prevent corrosion.
4
Align the index marks and install the brake disc on the hub.
6. NOTE: It is not necessary to install new brake pads if the friction material properties are within specification.
Install the brake caliper and brake caliper anchor bracket.
