Explorer 2WD V8-4.6L VIN 8 (2006)
4. Disconnect the 2 brake tube fittings from the brake master cylinder.
^
To install, tighten to 18 Nm (13 ft. lbs.).
5. Remove the 2 nuts, the brake master cylinder and the square cut seal.
^
To install, tighten to 25 Nm (18 ft. lbs.).
6. NOTE: Make sure that the square cut seal is properly installed or incorrect brake pedal feel can occur.
To install, reverse the removal procedure.
^
Bleed the brake system.
