Explorer 2WD V8-4.6L VIN 8 (2006)
7. Disconnect the PCV heater hose from the coolant crossover manifold assembly.
8. Disconnect the heater hose from the coolant crossover manifold assembly.
9. Disconnect the upper radiator hose from the coolant crossover manifold assembly.
10. Remove the bolts, the coolant crossover manifold assembly and the gaskets. Discard the gaskets.
^
To install, tighten to 10 Nm (89 inch lbs.).
11. To install, reverse the removal procedure.
^
Install new gaskets.
