Explorer 2WD V8-4.6L VIN 8 (2006)
3. Disconnect the fuel vapor tube.
4. Remove the bolts and position the thermostat housing cover aside.
5. Remove the O-ring seal and the thermostat.
Installation
1. Install the thermostat with the spring facing down.
2. NOTE: Inspect the thermostat housing cover O-ring seal. Install a new O-ring seal, if necessary.
Install the O-ring seal.
3. Position the thermostat housing cover and the bolts.
^
Tighten to 10 Nm (89 inch lbs.).
4. Connect the fuel vapor hose.
5. Install the throttle body.
6. Fill and bleed the cooling system.
