Explorer 2WD V8-4.6L VIN 8 (2006)
Variable Valve Timing Solenoid: Service and Repair
VARIABLE CAMSHAFT TIMING (VCT) OIL CONTROL SOLENOID
Removal and Installation
1. Disconnect the battery ground cable.
2. Disconnect the variable camshaft timing (VCT) oil control solenoid electrical connector.
3. Remove the grommet.
4. Remove the bolt and the VCT oil control solenoid.
-
To install, tighten to 5 Nm (44 lb-in).
5. To install, reverse the removal procedure
