Explorer 2WD V8-4.6L VIN 8 (2006)
NOTE: The headlamp bulb should not be removed from the headlamp assembly until just before a new bulb is installed. Removing the bulb for an
extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp assembly where they can settle on the lens and
reflector. Never turn on the headlamps with the bulb removed from the headlamp assembly.
All vehicles
1. Remove the headlamp assembly.
Explorer
2. Rotate the headlamp bulb one-eighth turn counterclockwise and remove the headlamp bulb.
Mountaineer
3. Remove the headlamp bulb access cover.
4. Rotate the headlamp bulb one-eighth turn counterclockwise and remove the headlamp bulb.
-
Disconnect the electrical connector.
All vehicles
5. To install, reverse the removal procedure.