Explorer 2WD V8-4.6L VIN 8 (2006)
Fluid Filter - A/T: Service and Repair
5R55S Automatic Transmission
Transmission Fluid In-Line Filter
Transmission Fluid In-Line Filter
Special Tool
Special Tool(s)
Material
Material
NOTE: Use the following guidelines for installing the transmission fluid in-line filter:
^
If the transmission was overhauled and the vehicle was equipped with an in-line fluid filter, install a new in-line fluid filter.
^
If the transmission was overhauled and the vehicle was not equipped with an in-line fluid filter, install a new in-line fluid filter kit.
^
If the transmission is being installed for a non-internal repair, do not install an in-line filter or filter kit.
^
If installing a Ford-authorized remanufactured transmission, install the in-line transmission fluid filter that is supplied.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the secondary latch from the fluid cooler connector.