Explorer 2WD V8-4.6L VIN 8 (2006)
Hose/Line HVAC: Service and Repair
Suction Accumulator to Compressor Line
SUCTION ACCUMULATOR TO COMPRESSOR LINE
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning system, except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
1. Recover the refrigerant.
2. Remove the suction accumulator outlet fitting nut.
-
To install, tighten to 8 Nm (71 lb-in).
3. Disconnect the auxiliary evaporator outlet line fitting.
-
Discard the O-ring seals.
4. Remove the suction accumulator-to-compressor line bracket nut.
-
To install, tighten to 7 Nm (62 lb-in).
5. Remove the suction accumulator-to-compressor line middle fitting nut and disconnect the fitting.
-
Discard the O-ring seal.
