Explorer 2WD V8-4.6L VIN 8 (2006)
The use of rental vehicles is not authorized for this program.
[NEW] CLAIMS PREPARATION AND SUBMISSION
^
Enter claims using Direct Warranty Entry (DWE).
^
When claiming for the locally obtained radiator hose clamps, please use Miscellaneous expense code "OTHER" for the amount of $8.00 (4 clamps)
^
Related damage must be claimed on a repair line that is separate from the repair line on which the FSA is claimed. Related damage requires approval
from Special Service Support Center.
^
"MT" labor should be submitted on a separate repair line with the related damage flag checked. "MT" labor requires approval from Special Service
Support Center.
^
Refer to ACESII manual for claims preparation and submission information.
^
PROGRAM TERMS: This program will be in effect for repairs performed through April 30, 2007
Attachment II - Labor and Parts Information
LABOR ALLOWANCES
PARTS REQUIREMENTS / ORDERING INFORMATION
Please obtain replacement worm-gear style hose clamps locally.
PARTS RETENTION AND RETURN
Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures".
Attachment III - Technical Information
OVERVIEW
This program is being supplemented to include replacement of the upper radiator hose clamps. Included in this supplement is:
^
additional information regarding access to clamps on certain vehicle/engine applications and,
^
clarification in the proper methods of breaking the adhesive bond and removing the clamps from the hoses without causing any damage.
SERVICE PROCEDURE
WARNING:
TO AVOID PERSONAL INJURY, DO NOT UNSCREW THE RADIATOR CAP WHILE THE ENGINE IS OPERATING OR HOT. THE
COOLING SYSTEM IS UNDER PRESSURE; STEAM AND HOT LIQUID CAN COME OUT FORCEFULLY WHEN THE CAP IS
LOOSENED SLIGHTLY. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CAUTION:
The coolant must be recovered in a suitable, clean container for reuse. Do not contaminate the coolant by mixing it with other coolants or draining it
