Explorer 2WD V8-4.6L VIN 8 (2006)
gap between the fuel level sensor assembly and fuel pump bracket. Torque the fastener at the bottom of the fuel level sensor assembly to 1 N.m (9
lb-in).
12.
Re-install fuel pump assembly into fuel tank per WSM, Section 310-01.
NOTE
TAKE CARE NOT TO DAMAGE/BEND FLOAT ROD OR SENDER CARD DURING INSTALLATION OF FUEL PUMP ASSEMBLY.
13.
Re-install fuel tank per WSM, Section 310-01.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
OPERATION
DESCRIPTION
TIME
061710A
2004-2007
2.9 Hrs.
Explorer/Mountaineer:
Diagnose And Replace
The Fuel Gauge Tank Unit
(Do Not Use With 9275D,
9275A, 9002A)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
9A299
28
Disclaimer