Explorer 2WD V8-4.6L VIN 8 (2006)
5. CAUTION: Putting the large RCM electrical connector into the RCM on an angle can cause bad electrical connections and damage
components.
Position the large RCM electrical connector into the RCM.
6. Connect the large RCM connector.
-
CAUTION: Do not push the connector on to where the lever pivots and seats itself. Light pressure is needed to get the connector into
position on the RCM before using the lever to fully seat the connector.
With the large RCM electrical connector uniformly aligned to the RCM, lightly push in until a subtle audible click is heard and a slight
resistance is felt.
-
Using the connector position assurance lever, pivot it toward the RCM, drawing the connector into the RCM. Make sure the thumb tab is
engaged to the retainer on the RCM and locked in place.
7. Install the floor console.
8. Repower the system.
