Explorer 2WD V8-4.6L VIN 8 (2006)
Steering Wheel: Service and Repair
Steering Wheel
Steering Wheel
Removal and Installation
1. Place the steering wheel in the straight-ahead position and turn the ignition switch to the OFF position.
2. Remove the driver air bag module.
3. Disconnect the steering wheel switches electrical connector.
4. NOTE: A new bolt must be installed.
Remove the steering wheel bolt and the steering wheel.
^
Discard the bolt.
^
To install, tighten to 40 Nm (30 ft. lbs.).
5. To install, reverse the removal procedure.
