Explorer 2WD V8-4.6L VIN 8 (2006)
Steering Wheel: Service and Repair
Steering Wheel Controls
STEERING WHEEL CONTROLS
Removal and Installation
1. NOTE:
-
It is not necessary to remove the driver air bag module during this procedure.
-
When removing the steering wheel controls, disengage the RH side of the controls first.
Using an appropriate tool, pry the steering wheel controls out of the steering wheel.
2. NOTE: Do not allow the electrical connector to fall back into the steering wheel.
Remove the steering wheel controls.
-
Disconnect the electrical connector.
3. To install, reverse the removal procedure.