Explorer 2WD V8-4.6L VIN 8 (2006)
8. Disconnect the fuel vapor line.
9. Unclip the fuel vapor line from the fuel tank and position aside.
10. CAUTION: Extreme care must be exercised when removing and installing the stabilizer bar on vehicles equipped with rear air conditioning
(A/C) and/or rear beating or damage to the A/C lines and rear heater hoses can occur.
With the aid of an assistant, remove the stabilizer bar from the LH side of the vehicle.
11. CAUTION: Before tightening the stabilizer bar link nuts, use a suitable jack to raise the suspension until the distance between the center of the
hub and the lip of the fender is equal to the measurement taken in Step 1 (curb height).
To install, reverse the removal procedure.
