Explorer 2WD V8-4.6L VIN 8 (2006)
3. Install the transmission fluid cooler tube bracket and nut.
^
Tighten to 12 Nm (9 ft. lbs.).
4. NOTE: Install new universal joint strap bolts. If new universal Joint strap bolts are not available, coat the threads of the original universal Joint
strap bolts with threadlock and sealer.
If removed, install the universal Joint straps and 4 new universal Joint strap bolts.
^
Tighten to 19 Nm (14 ft. lbs.).
5. Connect the engine oil level sensor electrical connector.
6. Connect the transmission fluid cooler tube to the radiator.
