Explorer 2WD V8-4.6L VIN 8 (2006)
Install the extension housing.
^
Tighten to 30 Nm (22 ft. lbs.).
3. Install the transmission support insulator and lower the transmission onto the transmission support insulator.
4. Install the transmission support insulator bolts.
^
Tighten to 90 Nm (66 ft. lbs.).
5. Install the transmission support insulator nuts.
^
Tighten to 90 Nm (66 ft. lbs.).
6. Install the driveshaft.
7. Carry out fluid level check.