Explorer 2WD V8-4.6L VIN 8 (2006)
6. Remove the fluid pan gasket.
7. CAUTION: Do not pull on the wire harness to disconnect the connector or damage to the connector will occur.
Disconnect the main transmission electrical harness by twisting the outer shell and pulling back on the connector.
8. Pull the release tab and pull down on the bulkhead connector retainer.
9. CAUTION: Do not touch the electrical connector pins or the exposed solenoid tabs on the TCM. Electrostatic discharge may occur and may
cause damage to the mechatronic unit.
With the release tab down, pull the outer shell of the bulkhead electrical connector out of the TCM.
10. CAUTION: Do not touch the electrical connector pins or the exposed solenoid tabs on the TCM. Electrostatic discharge may occur and may
cause damage to the mechatronic unit.