Explorer 2WD V8-4.6L VIN 8 (2006)
12. Repeat Steps 8 through 10. If flow is now approximately 208 ml (7 oz.) in 15 seconds, the cooler lines and auxiliary cooler must be cleaned. Carry
out this entire test after the backflushing and cleaning procedure. If, after carrying out the backflushing and cleaning procedure, the flow is still
not adequate, new cooler lines and/or an auxiliary cooler must be installed. If the flow from the case is still not adequate after the installation of
new cooler lines and/or an auxiliary cooler, the pump and/or torque converter may be at fault. Carry out the appropriate procedures for diagnosis
and repair.
Auxiliary Transmission Fluid Cooler
Auxiliary Transmission Fluid Cooler - 5R55S
Material
Material
