Explorer 2WD V8-4.6L VIN 8 (2006)
Disconnect the solenoid body harness connector.
4. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage. If not damaged, the gasket should be reused.
Remove the 16 transmission fluid pan screws, fluid pan and gasket.
5. Remove the transmission fluid filter.
6. CAUTION: Do not damage the solenoid body connector pins.
Remove the solenoid body bolts and remove the solenoid body by pulling down on the solenoid body and pushing down on the connector from the
other side of the case.
Installation
