Explorer 2WD V8-4.6L VIN 8 (2006)
7. Install the fluid pan and tighten the bolts in a crisscross pattern.
^
Tighten to 14 Nm (10 ft. lbs.).
8. Connect the main transmission electrical harness by pushing it in and twisting the outer shell to lock it in place.
9. Using the refill procedure, fill and check the transmission fluid.
10. If a new or the existing mechatronic assembly is installed, the TCM will need to be reflashed to the latest level calibration available.
Overhaul (Disassembly & Assembly of Subassemblies)
Mechatronic Assembly
