Explorer 2WD V8-4.6L VIN 8 (2006)
8. Using the special tool to hold the pinion flange, remove and discard the pinion nut.
9. Index-mark the pinion flange and drive pinion gear to maintain initial balance during installation.
10. Using the special tool, remove the pinion flange.
11. If necessary, use a screwdriver to force up the metal flange of the pinion seal. Install gripping pliers and strike with a hammer to remove the drive
pinion seal.
Installation
1. If removed, lubricate the lips of the new drive pinion seal with grease.
2. CAUTION: If the drive pinion seal becomes misaligned during installation, remove the drive pinion seal and install a new drive pinion seal.
NOTE: Always install a new drive pinion seal when removed.