Explorer 2WD V8-4.6L VIN 8 (2006)
Rear Door Window Glass: Service and Repair
Rear Door Window Glass
REAR DOOR WINDOW GLASS
Removal and Installation
1. Remove the rear door trim panel.
2. Remove the rear door speaker,
3. Remove the interior moulding.
4. Remove the rear door weather shield.
5. Remove the 2 rear door glass top run channel assembly bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
6. Remove the rear door window glass-to-regulator bolt.
-
Position the rear door window glass as necessary to access the rear door window glass-to-regulator bolt.
-
To install, tighten to 7 Nm (62 lb-in).
7. Remove the applique on the rear door.
-
Remove the screws.
8. Remove the rear door window glass.
-
Pull the glass out through the top inboard side of the door.
9. To install, reverse the removal procedure.