Explorer 4WD V6-245 4.0L (1991)
b.
Remove the nut retaining the "slide bar" assembly to the mounting bracket attached to the front of the seat track assembly. refer to Figures 6
and 7.
c.
Remove the "slide bar".
8.
Detach the seat track assist spring.
9.
Remove the two (2) screws retaining the inboard (R.H.) seat track assembly to the seat cushion and remove the track assembly.
SEAT TRACK ASSEMBLY REWORK
10.
Clamp the seat track assembly in a vise, refer to Figure 7.
CAUTION:
