Explorer 4WD V6-245 4.0L (1991)
Figure 4
This TSB article is being republished in its entirety to clarify the 4 X 2 Models repair procedures and their reference to the Camber Adjuster
Configurations Chart, Figure 4.
ISSUE:
A steady state drift/pull to the right may occur while driving. It may be accentuated while braking. This drift/pull may be caused by the caster
settings.
ACTION:
If service is required, refer to the following procedure for service details.
The following list of service options may be used singly, or in combination. They should be used in the order listed, as needed, to arrive at the optimum
caster split of 0.5~ RH high. The nominal amount of expected caster adjustment each step should yield is also listed, assuming it is replacing the
factory-installed part.
NOTE:
SERVICE PARTS, OTHER THAN THOSE LISTED, SHOULD NOT BE USED BECAUSE THEY MAY AFFECT THE AMOUNT OF
