Explorer 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Engine Block Heater: Service and Repair
Removal
1. Drain the cooling system.
2. Raise and support the vehicle.
3. Disconnect the connector.
4. Remove the block heater.
1
Note: Do not loosen the screw more than necessary for removal.
Loosen the screw.
2
Twist and slide the block heater to release the retainer clip and discard the retainer clip.
3
Remove the block heater.
Installation
1. To install, reverse the removal procedure.