Explorer 4WD V6-245 4.0L SOHC VIN K SFI (2001)
Windshield Washer Reservoir: Service and Repair
REMOVAL
1. Disconnect the windshield washer hose from the windshield washer pump.
NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before removal.
2. Disconnect the coolant overflow hose from the engine coolant overflow reservoir and plug the outlet of the reservoir.
3. Disconnect the windshield washer reservoir pump electrical connector and low level washer fluid electronic sensor connector, if equipped.
4. Remove the engine air cleaner; refer to Fuel Delivery and Air Induction.
5. Remove the two screws and two nuts and remove the windshield washer reservoir.
