Explorer 4WD V6-245 4.0L VIN X SFI (1997)
Fluid - A/T: Service and Repair
Maintenance
CAUTION: Use only MERCON V XT-5-QM transmission fluid. Use of any other fluids may result in a transmission malfunction or failure.
1. Loosen, then remove, the transmission fluid pan attaching screws to drain the fluid.
2. Remove and discard old pan gasket.
3. Thoroughly clean the pan and the transmission case pan rail surface.
4. Install new pan gasket onto pan and install pan to case with screws. Tighten screws to 13-15 Nm (115-133 inch lbs.).
5. Add 2.8 liters (3 quarts) of MERCON V XT-5-QM or equivalent MERCON approved fluid to transmission through the fill tube.
6. Start the engine. Move transmission range selector lever through all gear ranges, checking for engagements.
7. Check and adjust transmission fluid in 0.25 liter (1/2 pint) increments to proper level (cross-hatched area of fluid level indicator at normal
operating temperature).
