Explorer 4WD V6-245 4.0L VIN X SFI (1997)
Fluid - A/T: Testing and Inspection
Fluid Condition Check
1. Check the fluid level.
2. Observe color and odor of the fluid. It should be red, not brown or black. Odor may indicate an overheating condition, clutch disc or band failure.
3. Use an absorbent white facial tissue and wipe the fluid level indicator. Examine the stain for evidence of solid particles and for engine coolant
signs (gum or varnish on fluid level indicator).
If particles are present in the fluid or there is evidence of engine coolant or water, the transmission fluid pan must be removed for further
inspection.
If fluid contamination or transmission failure is confirmed by further evidence of coolant or excessive particles in the transmission fluid pan, the
transmission must be disassembled and completely cleaned and serviced. This includes cleaning and flushing the torque converter and
transmission cooling system.
During disassembly and assembly, all overhaul checks and adjustments of clearances and end play must be made.
After the transmission has been serviced, all diagnostic tests and adjustments listed in the Diagnosis by Symptom charts must be completed to
make sure that the problem has been corrected.
