Explorer 4WD V6-245 4.0L VIN X SFI (1997)
7. Use the Pitman Arm Puller to separate the front suspension lower arm from the front wheel knuckle/spindle.
8. Remove the front suspension lower arm.
1. Remove the front suspension lower arm bolts and nuts.
2. Remove the front suspension lower arm.
CAUTION: On 4WD/AWD vehicles, support the front suspension arm bushing joint, axle shaft and front wheel knuckle before
separating the front wheel knuckle from the front suspension lower arm. Failure to do so can cause damage to the front axle shaft
assembly.
INSTALLATION
1. Install the front suspension lower arm.
1. Position the front suspension lower arm to the front suspension crossmember.
2. Install the pivot bolts and nuts and tighten until snug.
NOTE:
-
Tighten the front suspension lower arm pivot bolts and nuts until snug. Do not tighten to specification until the installation procedure is
complete.
-
Inspect the front suspension lower arm ball joints and boot seals for damage.
