Explorer 4WD V6-4.0L (2009)
Antenna Cable: Service and Repair
Antenna Lead-In Cable
Antenna Lead-In Cable
Removal and Installation
1. Remove the Audio Control Module (ACM). For additional information, refer to Audio Control Module (ACM) See: Cellular
Phone/Communications Control Module/Service and Repair/Removal and Replacement/Audio Control Module (ACM).
2. Lower the glove compartment door.
3. NOTE: Release the pin-type retainers.
Disconnect the antenna lead-in cable connection and remove the antenna lead-in cable.
4. To install, reverse the removal procedure.
