Explorer 4WD V6-4.0L (2009)
Rear Door Latch: Removal and Replacement
Rear Door Handles, Locks and Latches - Exploded View
Rear Door Handles, Locks and Latches - Exploded View
1. For additional information, refer to the procedures.
Rear Door Latch
Rear Door Latch
Removal and Installation
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Release the interior door handle actuating cable locator from the door frame.
4. Open the clip and disconnect the exterior handle actuating rod.
5. Disconnect the rear door ajar switch and rear door lock actuator electrical connectors.
6. Remove the 3 rear door latch screws.
-
To install, tighten to 12 Nm (106 lb-in).
7. Release the rear door push button rod from the door frame retainer.