Explorer 4WD V6-4.0L (2009)
Hood Latch: Service and Repair
Hood Latch
Hood Latch
Removal and Installation
NOTE: Mark the position of the hood latch prior to removing the hood latch bolts to aid positioning during installation.
1. Remove the 2 hood latch bolts.
-
To install, tighten to 12 Nm (106 lb-in).
2. Disconnect the hood latch release cable from the hood latch and remove the latch.
3. To install, reverse the removal procedure.
-
Check the latch adjustment to make sure the latch was installed and aligned correctly.
