Explorer 4WD V6-4.0L (2009)
Console: Service and Repair
Console - Front, Floor
Console - Front, Floor
Removal and Installation
1. Move the front seats to the full rearward position.
2. Remove the LH and RH front floor console rear bolts.
3. Position the front seats to the full rearward position.
4. Remove the selector lever bezel.
5. Open and lift the front floor console stowage door upward.
6. Remove the 2 front floor console finish panel screws.
7. Remove the front floor console finish panel.
-
Disconnect the electrical connector.
8. Disconnect the front floor console electrical connectors.
9. Remove the 2 front floor console-to-instrument panel screws.
10. Remove the LH and RH front floor console pushpin retainers.
11. Remove the LH and RH front floor console extension trim panels.
12. Remove the LH and RH front floor console middle bolts.