Explorer 4WD V6-4.0L (2009)
Keyless Entry Transmitter: Testing and Inspection
Remote Memory Activation
Remote Memory Activation
1. Position the driver seat and adjustable pedals to the desired position.
2. Press the set button on the lower center of the instrument panel.
3. Within 5 seconds press one control on the Remote Keyless Entry (RKE) transmitter and then the 1 or 2 button on the lower center of the
instrument panel to associate the RKE transmitter to the driver 1 or the driver 2 position. This stores the configuration for driver 1 or driver 2.
4. If a second memory setting is desired, repeat the procedure with the second RKE transmitter.