Explorer 4WD V6-4.0L (2009)
4. Install the 2 inboard recliner-to-cushion frame bolts.
-
Tighten to 55 Nm (41 lb-ft).
5. Position the kneeling mechanism release cable pivot onto the inboard recliner and install the screw.
-
Make sure to put the recliner pin through the cable pivot.
Outboard recliner
6. NOTE: The cable ends are color coded/keyed to the levers.
Position each keyed cable end to the outboard recliner lever and rotate into position.
-
Install the cable casing to the outboard recliner.
7. Install the outboard recliner inner cover.
8. NOTE: The outboard recliner inner cover is removed for clarity.
Position the outboard recliner release pivot stub into the recliner shaft.
9. Install the 2 outboard recliner-to-cushion frame bolts.
-
Tighten to 55 Nm (41 lb-ft).
