Explorer 4WD V6-4.0L (2009)
23. Install the heater tube bracket front bolt.
-
Tighten to 34 Nm (25 lb-ft).
24. Position the upper fan shroud and install the 2 bolts.
-
Tighten to 7 Nm (62 lb-in).
25. Position the coolant expansion tank, install the 2 bolts and connect the coolant overflow hose.
-
Tighten to 7 Nm (62 lb-in).
26. Position the power steering fluid reservoir and install the bolt.
-
Tighten to 7 Nm (62 lb-in).
27. Install the weatherstrip.
28. Install the ACL outlet pipe.
29. Connect the battery ground cable.
Engine Support Insulators
Engine Support Insulators
