Explorer 4WD V6-40L (2009) | Engine Seals and Gaskets | Valve Guide Seal | Service and Repair
Valve Guide Seal: Service and Repair
Valve Seals
Valve Seals
Removal
1. Remove the valve springs. For additional information, refer to Valve Springs See: Cylinder Head Assembly/Valve Spring/Service and
Repair/Removal and Replacement/Valve Springs.
2. Remove the valve seals.
Installation
1. NOTE: Lubricate the valve seals with clean engine oil.
Using the Valve Stem Seal Installer, install the valve seal.
2. Install the valve springs. For additional information, refer to Valve Springs See: Cylinder Head Assembly/Valve Spring/Service and
Repair/Removal and Replacement/Valve Springs.