Explorer 4WD V6-4.0L (2009)
If not equipped with a TBC module, GO to J6.
No
GO to J10.
-------------------------------------------------
J5 CHECK THE TBC MODULE
-
Disconnect: TBC Module C238.
-
Do the stoplamps continue to illuminate?
Yes
GO to J6.
No
INSTALL a new TBC module. CLEAR the DTCs. REPEAT the self-test.
-------------------------------------------------
J6 CHECK THE PCM
-
Disconnect: PCM C175b.
-
Do the stoplamps continue to illuminate?
Yes
GO to J7.
No
GO to J12.
-------------------------------------------------
J7 CHECK CIRCUIT CCB08 (VT/WH) FOR A SHORT TO VOLTAGE (TO OTHER MODULES)
-
Disconnect: SJB C2280c.
-
Do the stoplamps continue to illuminate?
Yes
GO to J8.
No
REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test.
-------------------------------------------------
J8 CHECK CIRCUIT CCB08 (VT/WH) FOR A SHORT TO VOLTAGE (FROM STOPLAMP SWITCH)
-
Disconnect: SJB C2280e.
-
Do the stoplamps continue to illuminate?
Yes
GO to J9.
No
REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test.
-------------------------------------------------
J9 CHECK CIRCUIT CCB08 (VT/WH) FOR A SHORT TO VOLTAGE (TO HIGH MOUNTED STOPLAMP)